Boral Roof Inspection Nationwide

Boral Roof Inspection in Tampa: What to Know First

Boral roof inspection in Tampa costs between $195 and $450 for a full written assessment, and we schedule most inspections within three to five business days. We’re an independent Boral service provider – not affiliated with the manufacturer – which means we tell you what your roof actually needs, not what a warranty department wants to hear. This page is for homeowners in Tampa who own a Boral concrete or clay tile roof and want a straight answer on its condition before a leak forces the issue.

Call (850) 750-9193

If you’ve got a Boral roof and you’re not sure it’s been checked since the last storm season, call (850) 750-9193. We’ll put a real person on the phone and get you on the schedule.

How Boral Products Fail – and How We Fix Them

Boral makes a solid tile. But every product has a failure pattern, and around Tampa we see the same ones repeat themselves. Here’s what we find on Boral roofs in this area, and what we do about it:

• Valley flashing corrosion on Boral concrete tile installations. This is the most common Boral-specific call we get in Tampa. The tile itself holds up, but the galvanized valley metal underneath corrodes in our salty, humid air within 12 to 18 years. Water runs under the tile, rots the decking, and the homeowner doesn’t see a thing until a ceiling stain appears. We pull the tile at the valley, replace the metal with a heavier gauge, and reset the Boral tile over fresh underlayment.
• Cracked hip and ridge caps from foot traffic. Boral’s concrete hip caps and ridge caps are dense but brittle at the edges. One misplaced boot print from a cable installer or AC technician cracks them. Once a cap cracks, wind-driven rain walks straight into the roof system. We identify every cracked cap, color-match the replacement, and bed them properly with the right mortar profile so they don’t shift.
• Underlayment fatigue under Boral tile. Here’s the truth: Boral tile can last 50 years, but the underlayment underneath it won’t. In Tampa’s heat, the original felt or synthetic underlayment dries out, wrinkles, and stops shedding water around year 15 to 20. The tiles look fine from the ground. An inspection is the only way to know what’s happening underneath. We lift test tiles in multiple locations across the roof deck to check the underlayment’s condition, not just the tile on top.
• Fascia and drip edge issues where Boral tile overhangs too short. Some older Boral installations in Tampa were set with insufficient overhang past the drip edge. Over time, the tile edge wicks water backward into the fascia board. We see this most often on barrel-profile tile installed before current code. Our fix is a fascia inspection alongside the tile assessment, with a recommendation for drip edge extension where it’s needed.
• Skylight and penetration flashings that don’t match Boral profiles. Flat flashings under a curved Boral barrel tile leave gaps. We see this on re-roofs where a previous contractor used generic flashing instead of profile-specific pieces. Water gets in around the skylight curb or vent pipe. We remove the surrounding tile, install flashing that matches the tile profile, and reset everything square.

Our Boral Roof Inspection Process

Here’s how a Boral inspection works when you call us in Tampa. No surprises, no pressure, and everything on paper.

1. 1
   You call (850) 750-9193. A live person answers. No voicemail, no callback queue. We ask about your roof’s age, any visible issues, and when you first noticed a problem.
2. 2
   We schedule the inspection and show up on time. Our technicians arrive in uniform, background-checked, and ready to walk every square foot of your roof.
3. 3
   We inspect the Boral tile, the underlayment, and everything underneath. We don’t just look at tile from the ground. We walk the roof where it’s safe, lift representative tiles at valleys, penetrations, and ridges, and document what we find with photos.
4. 4
   You get a written report with a plain-language breakdown. Every finding comes with a photo, a description of what’s wrong, and whether it’s a repair-now item or a monitor-it item. If you need work, the price goes on paper before any work starts. Period.
5. 5
   We do the repair right, then test it. If the scope includes repairs, we make them the same visit when possible, then run water over the area to confirm the fix works.
6. 6
   Everything we do is guaranteed in writing for one full year. If it’s not done right, we come back at no charge. That’s the 365-Day Done Right Promise.

One thing Travis Oakley insists on: he walks every Boral job twice before signing off. Once after the inspection, once after the work. If it’s not squared away, we’re not done.

What Boral Roof Inspection Costs in Tampa

Here are the real numbers for Boral roof inspection in Tampa. These are our ballpark ranges, not a promise – your roof’s size, pitch, and condition move the final number.

• Standard Boral tile inspection (up to 3,000 sq ft roof): $195 – $295
• Large or steep Boral roof inspection (3,000+ sq ft or pitch over 6/12): $350 – $450
• Inspection plus minor repair (cracked cap replacement, small flashing fix): Add $150 – $400 depending on the scope
• Underlayment test (lifting tiles to check decking): Included in the inspection, not a separate fee

What moves the price: roof size, how many stories, how steep the pitch is, and whether we need special access equipment. You’ll always know the number before we send a tech out, and you’ll always have it in writing before any repair work begins. Call (850) 750-9193 for a free estimate on your Boral inspection.

Why Tampa Homeowners Call Brennan Roofing Co Tampa for Boral Work

We operate under The Garrison Standard, and it’s the same on every job: written price before work starts, background-checked uniformed technicians who show up inside the promised window, and a 365-Day Done Right Promise on everything we touch. That’s not a slogan. It’s what we put in writing.

Our crew knows Boral tile because we’ve been on Boral roofs across Tampa – including a stretch of older tile work near Seminole Heights that taught us more about underlayment fatigue than any training manual. When you call us, you get a tech who knows the difference between a Boral barrel tile and a flat profile, not someone learning on your roof. And if your Boral repairs ever require a different material like GAF, Owens Corning, or CertainTeed for the underlayment or flashing, we install those lines too and explain the trade-offs plainly before you decide.

Calls are answered by a live person around the clock. That matters when a Tampa storm just passed and you need to know if your Boral roof is still shedding water.

FAQs